Sense everything that moves the needle.
One sensor family, one platform.
Prochista sensors cover the full environmental and electrical picture of a facility, so a problem shows up as data long before it shows up as downtime.
- Temperature
- Humidity
- Dust
- Leak
- Vibration
- Power
Continuous readings, monitored live, illustrative
The sensor family
One family, the whole picture.
Spot, rack-level and room-level placement from a single sensor family, all streaming to ProDCIM.
Built for the field
Purpose-built for harsh, critical sites.
Industrial-grade hardware that survives the conditions of real data-center, telecom and utility sites.
Wide operating range
Rated for the temperature and humidity extremes of unmanned sites.
Rack & room coverage
Spot, rack-level and room-level placement from one sensor family.
Real-time readings
Continuous measurement streamed straight to the platform.
Configurable alerts
Per-sensor thresholds that fire before limits are breached.
Open protocols
SNMP, Modbus, BACnet, MQTT and Redfish, with no proprietary lock-in.
ProDCIM-native
Plug-and-play into ProDCIM dashboards and the 3D model.
Open protocols
Connect over any open protocol you run.
No proprietary lock-in. Prochista monitors any type of open protocol your equipment, servers and BMS already speak, from industrial buses to modern IT telemetry, and streams it straight to the platform.
SNMP
IT & networkv1 / v2c / v3 + traps from network and power gear
Redfish
IT & networkModern REST/JSON server & hardware telemetry
Modbus RTU
Industrial / OTSerial RS-485 field devices and meters
Modbus TCP
Industrial / OTEthernet Modbus for PLCs, meters and gateways
BACnet
Building / BMSBuilding-management, HVAC and cooling systems
MQTT
IoT & messagingLightweight pub/sub for IoT and edge telemetry
REST API
APIs & integrationOpen HTTP API to pull or push readings
Webhooks
APIs & integrationEvent push into ticketing, chat and automation
+ your protocol
Custom and legacy integrations on request.
Open standards, with no proprietary lock-in.
How it connects
Sensor to platform, in three hops
Sensor
Measures temperature, humidity, power and more
Gateway
Aggregates over Modbus / RS-485 / Ethernet
ProDCIM
Normalizes, visualizes and alerts
Typical specifications
| Measurement types | Temperature, humidity, dust, leak, vibration, power |
|---|---|
| Protocols | SNMP, Modbus, BACnet, MQTT, Redfish + REST API & webhooks |
| Connectivity | Wired bus (RS-485 / Modbus) and gateway to Ethernet |
| Power input | Low-power; bus- or gateway-powered (model-dependent) |
| Placement | Spot, rack-level and room-level |
| Operating environment | Industrial range, model-dependent |
| Platform | Streams directly to ProDCIM |
Exact specifications vary by model. See each sensor's datasheet for details.
Request hardware datasheetWhere they are used
Data centers
Rack and room thermal mapping, leak detection beneath cooling units, and power at the circuit, feeding capacity and PUE.
Telecom BTS & edge sites
Temperature, humidity and power across thousands of unmanned sites, with alarms before a site goes dark.
Industrial floors
Vibration on rotating machinery, gas and dust levels, and environmental conditions across the plant.
From the rack to the dashboard
Automatically, end to end.
Sensors only matter if their data reaches the right people in time. Prochista closes that loop.
1. Place
Mount sensors at rack, row and room level across the site.
2. Measure
Temperature, power and environment are sampled continuously.
3. Detect
Threshold and anomaly logic flag issues as they emerge.
4. Alert
The right team is notified, with the rack and reading attached.
See the full sensing picture on your sites
Book a walkthrough and we'll map your sensors, racks and sites into one monitoring platform.